1. For: Little Bear, Minor Rib and Universal
2. Determine desired location of Polar Blox per manufacturer's recommendation.
3. Clean the surface with soap and water or rubbing alcohol. Allow to dry completely before installing.
4. The Polar Blox should be placed with the holes down toward the roof.
5. Smear the adhesive on the bottom side of the Polar Blox, covering the entire surface to be mounted.
6. Press Polar Blox on roof, making sure there is no air trapped underneath. Squeeze-out is the recommended finish.
7. In warmer temperatures it may be necessary to secure the Polar Blox temporarily, until the adhesive firms.
8. The minimum application temperature is 50°F and the full curing time is 28 days

1 Tube for every 10-12 snow guards